...direction do they go in for a 1995 kawasaki zx600f1 cams will only fit 1 wat. if you look at the sprocket on the can it should be stamped inlet or exhaust. when fitting the writing should be
wheres the stater motor on a 2001 j1 kawasaki zx6r its on top of the trans over the sprocket
...up and especially if you don't tuck down all the way...so if you weigh 200lbs, have a nice wheelie sprocket on the back with a real wide low profile cool looking race slick i'm sure you'll lose
cams are marked 117 IN & 117 EX so they don't get mixed up, align the IN & EX marks on each sprocket with the the cylinder head surface so that the IN marks face to the rear & the EX marks
...thickness (All in all just the chain type) OEM is a 525, 108 link chain with a 15 tooth front sprocket and 40 tooth rear. It is best to change sprockets and chain together. A stretched/worn ...
I have A 2000 zx600j and I took off the rear tire to change the sprocket. My mistake was doing the back before the front sprocket and I've already cut the chain. Now I'm having a heck of a time ...
...The problem is everytime I accelerate or shift gear I can hear knocking sounds. Is it a chain or sprocket problem or worst than that? Probably a worn chain will cause that. Check your chain and ...
how do i change the rear sprocket on a 2003 kawasaki 636r? Hi, thats a nice easy one, first support your bike on a stand so the wheel is clear of the ground, remove the locking pin from the rear axle ...
Usually answered in minutes!
157 Questions
84 Questions
79 Questions
64 Questions
51 Questions