Question about GU2400XTPS Built-in Dishwasher
...spray arm seal, but the arm still wont spin. I get water but not enough pressure to turn the top arm. The bottom arm works fine. Should the top arm turn easily when pushed by hand. It appears that it ...
Question about GU2400XTPS Built-in Dishwasher
...spray arm. Take note of whether or not the arm moves freely or if its movement is restricted. It should not be restricted in its path of motion. Now gently pull up on an end of the spray arm. The ...
...spray arm does not rotate or spray any water. Whats the exact model? check whether the supply is passed over to the motor.... and also the motor Hello There is a fault in the device - motor, theres ...
Question about 24 in. KUDI01ILBS Stainless Steel Built-in Dishwasher
spray arm not attached We removed the spray arm to clean out the filter - now cannot get the spray arm to go back on - has threads - will not work any direction ------------- You may have stripped the
...spray arm a spin to make sure it rotates. It should spin freely. If not, remove plastic spray arm clip, flip it over, replace it, and try again. Make sure holes in the spray arm are clear of debris. ...
...spray arm inefficiency: Loading large or tall items in the lower basket which stops the arm revolving. Upper spray arm split along seam. Upper spray arm blocked. Under dosing of powder causing foam ...
Question about 24 in. 17482 / 17484 / 17489 Built-in Dishwasher
...spray arm is movable. Inspect the spray holes in the top spray arm. If clogged, clean the openings. If no clog, position the spray arm in a certain position (e.g.: arms facing front and back). Then ...
...spray arm, place the spray arms (all) in a specific position and activate the dishwasher for a few seconds with wash action. Then examine the position of the spray arms to determine if there was ...
Spray arms not working Dishwasher goes through full cycle, but its clear the spray arms aren't moving/spraying water during the cycle. Water comes in and drains correctly. I took out all the screens &
Question about 24 in. Profile PDW7800 Built-in Dishwasher
...spray arm making clunking sound The lower spray arm making noise - a thunking or clunking sound. Removed and replaced the arm to make sure it was sitting correctly, it seems to be, but noise remains. ...
Usually answered in minutes!
918 Questions
812 Questions
800 Questions
690 Questions
470 Questions