Questions & Answers for: spot button roomba

...Roomba...thanks Louise ;-) grrrrr I read somewhere that you need to clear the software in case there is a glitch. To do this, take the battery out and then, simultaneously hold down the "spot" and ...

500 series i robot is there a way to reset ? Hold the Spot and Dock/Demo buttons down for at least 10 seconds. The unit should now be reset.

...Spot, Clean or Max button it just goes "bonk"! (not "beep") and just sets there. I have cleaned it but not opened it up to look for anything broken. OK, I have fixed my Roomba!! First I went out and ...

button will not reset and the roomba will not run. The problem started when I the roomba sat dead for 12 hours. I tried the spot dock reset trick with no luck. The clock and sunday light stay let also

...button for ten seconds, then recharging the unit before you run it again. If you have a 500 series Roomba, don't take out the battery-- just press and hold the "spot" and "dock" buttons for about ...

It won't keep a charge and it doesn't do anything but beep when I push the buttons to spot, clean and max. what kind of vacuum is it.

...roomba discovery will not operate on the clean or max buttons, will do the spot clean and goes forward then circles. Turns itself off and plays a little da do da do do do do. I have emptied tray, ...

...spot button for 10 seconds. it is a a slow continual blink as if it is recharging continually. what is the problem. Sounds like you didn't remove the batteries protective tape. If this isn't a new ...

...spot Button for 10 seconds and still nothing. I tried to bypass the charger and that didn't work. I cleaned the connections from the base to the roomba - nothing. It currently is sitting on the ...

Spot Clean and CLEAN button down for 20 seconds then release. Rebooting Your Robot: All Roomba® and Braava® Models iRobot https://homesupport.irobot.com > article Dec 9, 2023 - ... NO green dot: Press