Questions & Answers for: spindle motor Microwave Ovens

...be a couple of wires connected to the motor and the spindle just pops off from the inside of the oven cavity. It's a fairly simple repair job and will run about $30-$40. Let me know if this

...spindle key because the original broke when trying to remove it when removing the motor assembly. I suggest that for servicing a microwave oven, you give it out to a service center to have the work ...

...spindle with your fingers. If it turns manually, then the motor has failed. If it doesn't, then some foodstuff has managed to freeze the spindle. In the latter case, pull the plug from the wall, use ...

...spindle simply lifts off the motor shaft. Since you posted no brand name or model number, I have no idea how to identify a part number for you, or where to order from. If you still need assistance, ...

...motor shaft. 4. With the spindle removed, disconnect the motor connector plug and mounting screws. 5. Insert new motor and reinstall everything using the steps provided in reverse order. If you have ...

...spindle bearings: if this fixes it then the motor bearings may just have dried out or may be on their way out. If not then look to the motor brushes and either the motor commutator (if the DC motor ...

...SPINDLE ON THE BOTTOM OF MOTOR HEAD UNIT, THE STAINLESS SHAFT WITH THE BLADE STRIPPED THE PLASTIC INTERAL OF THIS PRESS ON SPINDLE. THANKS It sounds like you're talking about the coupler on the ...

spindle is cracked at the bottom; it will turn by itself, but can not move the tray. You can check that by dropping the bottom plate (with the lights), and taking off the drive motor. It could also be

...motor is arcing to the spindle and fused the 3 leg roller support to the spindle. is this something this economical to repair; is it even fixable? thanks! If arcing and is seven years old time to ...

...spindle won't turn use the common sense, and logically, fix it. God bless youMicrowave Runs, Heats, but turntable does not move This is a fairly easy one. First, make sure the turntable ...