Questions & Answers for: Hayward spider fix

spider gasket in the base of the valve. This is probally your problem. If you pull this out and clean and dry the base you can spread some silicone on a new one and put back in place. Then replace the

...fix this? Where can I buy the parts? Sounds like you need a spider gasket. You should be able to get parts at a local pool supply store or online. you can also buy a valve and intall it on the pipe ...

...until the pilot is relit. Thank you for posting your question here on Fixya.com. Clear out the spiders or other debris that is blocking one or several gas jets into the burner tubes. After the ...

...spider gasket that has pulled out of place. remove this and clean and dry throughly. Add a small amount of silicone sealer to the bottom of a new one and install in groves then replace top of valve ...

...fix it? Thanks The spider gasket inside the 6-position valve is probably leaking. Take the model number of the valve to a local pool store and they can order a replacement. You will also need a ...

...spider gasket might be bad or might now have been installed right when you put the filter back together. You will need to fix it or replace it if water is coming from the waste while the filter is ...

...SPIDER GASKET. SEE YOUR LOCAL POOL STORE, GET MAGIK LUBE ALSO, ITS A COOL FIX THAT CAN SAVE YOU MORE THAN 150.00... GASKET COST YOU ASK ? ABOUT 10.00 BUCKS KOOL HUH.. OH AND YOU ...

Is there another solution to fixing the spider gasket on my heyward filter other that replacing the whole valve assembly? Are there any home remedies out there. Pool supply house says that I have to ...

...the waste hose even when the pump is in filter mode. Is this normal? No, you need to replace the "spider gasket" inside the valve. It is a common problem, not too hard to fix. Check out You

spider gasket can I run my filter until tomarow when I can change my sand filter spider gasket yes if backwash is leaking plug it that will get you by until you fix it