Questions & Answers for: speed pot error mobility scooter

will not go very fast about half speed speed pot error ? batery is not charged all the way If the battery is charged fully, check the speed knob on the steering console. It is probably turned too low.

...speed pot renewed + controller al was ok for a couple wks,then same again,except the scooter either went forward or reverse slowly on its own,then was told to renew speed pot,now left with the beep i ...

...speed pot related error, you need to make sure that the speed pot is in the central position , look under the stem and you should see a cross head , now that should be straight not at slight angle, ...

has 6 beep 6 Bleeps on a Go-Go indicates you have a speed or throttle pot error.

...Brake lever in freewheel mode 6. Throttle lever not in centre on switch on or faulty 7. Speed pot or throttle pot error 8. Motor volts error 9. Other internal fault/control fault Hope that helps

How do you change the Speed pot on xl8? I get 7 flashes as the error code on my xl8 mechanic is the solution

...it a fault on the speed potentiometer/pot ? a full list of error codes would be useful ? Anyone have a list of the fault codes ,thanks 7 flashes could be speed or throttle, i recommend replacing

How do I fix speed pot error on a celebrity x three wheel scooter replace the speed pot or throttle pot.

...x i turn key on led lights but as soon as you touch throttle it flash code 7 and does not move Hi code 7 is a speed pot error CONTACT A PRIDE DEALER. www.pridemobility.com. or call (877)706-2032 ...

...SPEED POT ERROR ) possible speed control pot ::: wig-wag. control lever ,is ,faulty or it's possible the computer (CONTROL BOX ,) is Faulty...Get in touch with pride mobility ...