Questions & Answers for: Logitech speaker works push cone

...speaker no longer works i just noticed the center speaker was not working. As i examined it i touched the speaker cone and it worked, but it only works if i hold something against the speaker. once i ...

speaker, opposite end of that is the possittive and negative wires connected to the cone. I scrapted/moved around the wires being careful not to puncture the cone with the screw driver to check to see

...works though, as well as the speakers connected to it. it makes a loud popping noise, sometimes. the popping can go in and out, sometiems for long periods of times. most of the time, it doesnt make ...

...speaker. I hope this information helps you with your problem. In short, you knackered it.  The flexing of the cone must have been to much for the small 2 wires that connect to the voice ...

...cone on the speaker itelf or dirt that has somehow gotten into the speaker coil. if its dirt then a can of compressed air for cleaning computers sometimes does the trick but it does mean opening up ...

...cone of the speaker. I had to open mine up because i had the same problem. It turned out that it was the wires that weren't making contact. I scrapped and moved them around connected the speaker and ...

...speaker works. theres something wrong with the input. both speakers work fine but the 1 of the inputs on the subwoofer stopped working, causing only one speaker 2 work try tapping the speaker box in ...

...push on the part of the speaker where the sound comes from...the main circle. 1.Your speaker cone is rupture. 2.Replace that subwolfer or speaker. Sounds.. (pun intended) like the "Voice Coil" is ...

...If thqat's the case, you'll need to replace the woofer inside the cabinet - or replace the set of speakers, which is probably more economical for

...push on connectors are used. Connect it up after installation and reassemble the unit. Be aware that there is a possibility that the sub's amp is blown, in which case replacing the speaker is of no ...