Questions & Answers for: Niles speaker grill

...grill off the speaker, do so and examine the surround. If it's rubber or plastic, it should be ok. If it's foam or paper, chances are it's bad. If you still have a problem, post a comment and I will ...

I have a Niles Audio SPS-1. the speaker imputs are very small for the size of the speaker wire and very close together. I AM GETTING shorts and the system is not working. Can I just use only part of ...

...Overloads can be from excessive periods of high output or marginally low impedance loading by the speakers; and shorts would be wiring issues or a speaker blowing up. You should be able to feel if ...

...grill fits.Using a correct size + screwdriver unscrew all the four screw anticlockwise till you feel the whole speaker panel shake loose. Make sure somebody is holding the outer frame while you are ...

...Overloads can be from excessive periods of high output or marginally low impedance loading by the speakers; and shorts would be wiring issues or a speaker blowing up. You should be able to feel if ...

...grill until it comes out. Be careful not to bend it.  Unscrew the 6 phillips screws on the speaker panel.  Then use a thick bladed putty knife on the groove that surrounds the whole ...

hi I need a spare part for my Niles SSVC-2. I need this little adapter on the back where the four speaker cables are plugged in. You have this part? Stefan Hi, Go to the store like radio shack or ...

I have an Onkyo TXNR609 home theater receiver hooked up to a 6 speaker surround sound setup in the living room. I also have 2 speaker pairs outside - one on the downstairs patio and one upstairs. I ...

IPad overheats with os7 i know you have to keep it in a cool envierment