Questions & Answers for: speaker diaphragm

...diaphragm can be fitted into the original driver and the speaker will be like brand new. first you must determine if you have the older RCF version (M44TI) or the newer Mackie versions (0008093). ...

...diaphragm at this link. http://www.soundspeakerrepair.com/speaker-parts-c/INST/Installation+Instructions You can buy a new Mackie SRM450 diaphragm at this link. ...

...Speaker repair carries Klipsch diaphragms. Make sure you have the correct model number. A simple way to check is to disconnect horn from crossover, and put an Ohm meter across the terminals it should ...

...diaphragm and voice coil of the speaker. If speaker is not overdriven(given more audio level than its power rating), kept free from moisture and diaphragm is prevented from damage, then speaker will ...

...speaker for diaphragm damage. Especially if its a paper cone diaphragm it absorbs moisture and looses its rigidity, which will lead to muffled sound due to lack of high frequency response. If you are ...

speaker can you help me. hi, As it hve a horn tweeter no need to replace the whole unit. You will get the diaphragm. go the following page check the third item. Its the diaphragm for JBL EON 15-G2. An

speaker.  Replacement only can be done. I had my diaphragm go and couldn't find the replacement part K 131. I popped the old diaphragm out and screwed the new generic diaphragm in and it fits and

replacement tweeters Hi I need two replacement tweeters for my celestion a2s do you know which make and model I could use that will fit inside the oval housing thanks TIP Why not go for replacement ...

...of the one doing the repair. Replacing the cone and the diaphragm will alter the acoustic characteristics of the speaker so it is not advisable not unless the diaphragm or the cone is already

...speaker have spot playing. do you know what could be the problem Generally, there are two possible problems- The horn diaphragm is blown or the power amp to the horn is broken. The diaphragm being ...