Question about FlexWave FW15 Guitar Amp Combo, 15 Watt Single 8 Speaker
speaker cable in many cases these cables look exactly the same. look at your cable look for the words speaker or instrument. you need the instrument cable. if you still have that problem. then you may
Question about Mg100dfx 100-Watt Combo Guitar Amplifier
...SPEAKER RATED cable which will have good quality 1/4 inch jacks. Go from a speaker out on the head to one of the jacks provided on the speaker cabinet. NOTE: some newer speaker cabinets use SPEAKON ...
...of your power amp.They will be 1/4"shielded cables or Balanced XLR cables. Do not use unshielded speaker cables to hook the mixer and the amp together.Run speaker cables from the speaker outputs
Question about Xenyx 1002fx Mixer 10 Input 2 Bus with Efx
how to in install the speakers to it You will need either powered speakers or an amplifier for the speakers. If you have powered speakers with built in amplifiers, use balanced audio connection cables
...speaker cable. Check that wire and try a new one. All speakers are susceptible to some type of interference. Make sure the cables aren't tangled and free from other powered equipment. Hope this ...
...speaker using the supplied cable? If not, connect the cable to the socket on the back of the right speaker labelled "to left speaker" and on the left speaker, to the socket labelled "from right ...
Question about Electronics Peavey PR15D 15" 200 Watt Bi-amplified Class D powered speaker
...speaker or have a defect. Get back to us with your findings. DO NO USE unbalanced cables to send audio to these. Unbalnced cables are TS cables like a guitar cable and are NOT to be used for ...
Question about Electronics Peavey PR15D 15" 200 Watt Bi-amplified Class D powered speaker
...lights up and speakers cut out Volume is bareley on shorted output, triac, or shorted speaker cable, shorted speaker, crossover...unhook speaker cables and see if it stops, if not, shop
Question about Xr 8600 8 Channel Powered Mixer
sound. Mon speaker sounds great. Switched speakers and cables and whichever speaker and cable is connected to Main, Main output is muffled. Is your graphic eq assigned to main and is kit set correctly
Question about Xr 8600 8 Channel Powered Mixer
back of the actual speaker cone connections. Check each wire at Both ends for damage. No sound at all suggests the issue might be at the 'Input' where the cable plugs into the back of the speaker body
Usually answered in minutes!
297 Questions
192 Questions
155 Questions
161 Questions
136 Questions