Questions & Answers for: Dodge Dakota spark plug wires 95 dodge

...spark, dead. I have changed out the plug wires, distributor cap, rotor button, ignition pickup, the coil and crack sensor, still won't start. What next, any suggestions or clues or where to go next? ...

spark plugs, wires, rotor. Added some ground wires to the block, but that did not help. manual transmission 110,000 miles. any help would be greatly appreciated. try replacing the coil, my 2.5 did the

spark plug wiring diagram my son changed the spark plug wire nd i believe he crossed them. spark plug wiring diagram problem, my truck is not firing well and I think the wires are put on in wrong ...

...spark. Pull a plug to chek for spar...nothing. What am I missing? The vechile has sat without running since last Oct. '08 There is a sensor that located on the right side of trans. that goes into ...

spark plug wrench and socket.you will need extension to reach back ones.if you bought new wires from parts store it will be even easier to find where plugs are located because you can compare the ones

...been change about 2 months ago all the spark plugs are gaped to where they need to what could be causeing this? Are you positive that the plug wires are all in the right places? Could be an ECM

...SPARK PLUGS NEED TO B SET AT RIGHT SPECS EVERY AUTO HAS ITS OWN SEP\\PECS B CAREFUL CUZ U CAN USE WRONG PLUG IT WILL BREAK OFF AND TOTAL UR PISTON THEN WELL UR BLANKED GOOD LUCK DIAMOND DEE AKA ...

...cylinder not firing 1995 slt dodge dakota 3.9L, one cylinder not firing. how many miles, several causes, fouled spark plug, damaged spark plug wire, bad fuel injector, i would check plug and wire ...

spark at the plugs. the motor turns over, checked under the distributer cap. looks ok. For my dodge daytona it was the ecm.( brain) Is it getting any fuel? Have you checked the injectors for power and

...spark plug. You'll need a spark-plug wrench to remove the current spark plugs. Check your Owners Manual for the recommended time to replace the spark plugs, and the recommended part-number for ...