...tv Any insight into how to change the ballast? IT is a little tricky but if you have basic had tools and a philips screwdriver you should be ok. You have to remove back panel and then pull out LIght ...
Question about E44W46LCD 44" Rear Projection HDTV-Ready Television
...sound. That is better know as the powersupply trying to fire up the lamp. If u hear that it is most likely good. Also, Keep in mind, that the new lamp could be bad!! Just because it is new, Doesn't ...
Question about 5,500 Watt Portable Generator #BSV550 W...
...TV sets out, cordless phone, and electronics in gas furnace. At my house it blew 3 100w light bulbs. I`ve had the generator for 6 yrs and it never did this before. sounds like a voltage regulation ...
...sound. There is power going to the tv, we can hear the clicks and see the red Led turn blue but it does not respond to any remote actions or on tv buttons either. it will stay on for around a minute ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions