SHUTS IT SELF OFF AMPLIFIER SHUTS IT SELF OFF IF VOLUME GOES OVER 50. You may be using 4 ohm speakers on an 8 ohms rated amplifier, or you are trying to play the amp excessivly loud for its design ...
Question about HTR500 Receiver
Sound not coming from left side surround sound speaker or my right side front speaker There is no sound coming from my left side surround sound speaker. and no sound coming from my right side front ...
...any surround mode from any source. I just connected the front main speakers and sound well, but when i connect the speakers (2 fr, 2 rear, 1 ctr) there`s no sound in any surround mode from any
...sound from all speakers. I set up everything correctly but I do not get sound out of the front 2 speakers and the front center channel. I do the auto setup and do not hear sound out of those same 3 ...
Question about TX-SR606 Receiver
...sound from the speakers. The cables can come loose during setup and not plugged all the way to the back of the RCA jacks or a defective cable causing signal loss. check the patch cord the right side ...
Audyssey vs Direct switching on Onkyo SR606 When I turn it on, I get no video or audio. I turn it off, then on, and usually after a few minutes, it will come on (after blinking and flashing video and ...
...sound to front speakers have checked connection but im lost now in the settings Onkyo are known for having 2 seperate connections for the rear speakers. 1 set for a surround sound, channel "A", and 1 ...
Question about Quartz Synthesized Tuner Amplifier Ri Model Tx-840 Remote Control
speakers to the "SPEAKER A" terminals on the rear of your Onkyo receiver, you will hear stereo sound when the Speaker A button is pressed on the front panel. If, for some reason, you wanted to connect
Question about HT-R2295 3D Ready A/V Receiver - 7.1 Channel Multizone - DTS-HD Master Audio, Dolby TrueHD, Dolby Digital Plus, DTS-HD High Resolution, Dolby Pro Logic IIz, Audyssey Dynamic EQ, DTS HD, Audyssey 2EQ, Audyssey Dynamic Volume - 1 kHz - FM, AM - HDMI -
...sound speakers I have tried making sure speaker connections are solid. Check to make sure your audio cables aren't touching any power cables. This will ensurethat you aren't getting signal ...
Usually answered in minutes!
269 Questions
261 Questions
161 Questions
135 Questions
85 Questions