Questions & Answers for: sony ps lx250h run

Sony PS-LX250H turntable won't turn We wanted to play an old lp last week, and haven't used the turntable for awhile and it wouldn't (turn). The belt is in place, but it just won't turn. It has power,

Sony PS-LX250H speed problem i have a PS-LX250H that is about 8 years old, and has been unused for about three years. i have to set the speed at 33 rpm to play a 45 rpm record, and a 33 rpm record ...

Sony ps-lx250h belt-driven turntable runs too fast. I have the 33rpm setting on for long playing records, and the turntable runs consistently a little too fast. I replaced the belt and it still ...

...sony PS-LX250H and the sound and the rotation of the record affecting the sound so it comes out slower than it should. The speed is not running at normal. Any suggestions on how I might make the ...

...sony ps- lx250h turntable? Not sure about yours, but some of these one lifts the rubber pad to get access to the belt through holes in the platter when you are re-installing to get the belt back on ...

Sony PS-LX250H is running slow from time to time notibly when playing slower songs like John Denver 33 albums. Hi, Replace belt of turntable to fix speed issue. Part number is as follows: 421549201...

HOW DO I INSTALL A TURNTABLE BELT FOR A SONY TURNTABLE Under the felt of the turning section, there should be two rather large holes. Insert your thumb and forefinger and pull the table off. You ...

...Sony ps-lx250h turntable most platters are secured with a c clip in the middle --gently prying it off should allow the platter to be removed--than a little dexterity is required to reattach the belt ...

...Sony PS-LX250H Turntable suddenly started playing records too fast for both 33 and 45 speeds. Any ideas on how to fix??? If this is a belt drive then most of these speed increases are caused by the ...

Panasonic SL-HM42 turntable runs a bit too slow on 33rpm. Hasn't been played in a while. How do I the plate off to check the belt? Most turntables need you to lift of the matt and then round the ...