Questions & Answers for: sony parts 1 468 798

...Red light @ power standby blinks five times, but no picture-screen black replace the lamp and the lamp ballast board using ONLY Sony Parts.lamp A-1606-034B ballast 1-468-798-16 this worked for

sony kdf-50we655 tv will not turn on green standby light come on for a minute or so then goes to 5 blinking red light sequence. have unplugged power cord and disconnected cable connection---no avail. ...

...is 5 then the lamp ballast board has failed, (part #1-468-798-14) if it is 4 then the optical block fan (# 178706511) is probably to blame, if it is 6 then the thermal fuse has gone bad..(#

...unit (Replaced for free) about 2 years ago........... any ideas !?! Jedi, Sounds like lamp and driver need to be replaced again... Lamp is Sony p/n# A-1052-675-B and the driver p/n# 1-468-798-14 ...

...1-468-604-21. I have old ps2 that is broken and look at power supply on it part 1-468-604-11. Will this work to repair Greetings Xwrongwayx, My suggestion is if it will plug into the newer unit, then ...

...1-468-798-14 for the 610 model replacement is done from the back of the set, should be straight forward, keep the red ballast wires apart for best results if a tech replaced the red tube, you have an ...

Sony Wega KF50WE610 Took more and more starts to turn on and finally wouldn't turn on. A few days ago I replaced the lamp. Worked well a day or two. Now turns on, but turns off in about 3 minutes (no ...

...what turns Lamp on! Part# for Ballast Board is 1-468-798-15 Try UED 1-800-648-6657 or Go to E-Bay you may find one their and cheaper too! Thats where I got my Lamp and Ballast Board for my DLP

...six times. What do you think is the problem. Lamp Fan is defective or its your Ballast Board part# 1-468-798 ,If Lamp Fan is OK it will be the Ballast. Look for one on E-Bay under Electronics ...

...same result. Tv model is Sony SXRD KDS-60A2000 5 blinks indicates the lamp driver/ballast is bad part# 1-468-936-13 ...