Questions & Answers for: sony kdl inverter fuse

...Sony KDL-40V2500 LCD 1080P TV there is no picture the red flash blinks 4 times! Do you now what is happening with my tv? Thanks A 4 flash shutdown indicates a backlight problem. It can be acused by a ...

...sony bravia model KDL 40S2010 did not start up this morning. The standby light flashes four times and then pauses for a few seconds and then flashes again. Grateful for any help you can offer to help ...

...Sony service but it didn't correct itself. A 4 flash issue means either the back light inverter (power supply) has failed or that one of the fluorescent tubes in the panel has failed. The only way to ...

...set does not respond Could be the inverter panel wich must be replaced or a broken fuse on the t-conn panel. When the fuse on the t-conn panel is defect there must be a little light in the

fuse on the inverter that supplies power to the board or it could even be a bad CCFL lamp. i suggest looking for the fuse that is the most likely suspect it may be yellow if i remember correctly. good

...Sony Bravia KDL-40S4100. I turn it on and I can hear the solenoid click, the green light is on and I get a faint blue illumination. I do not get a picture or sound... or any response from the remote ...

Sony Bravia KDL-52XBR TV - have sound but no picture Hi mstevens376, Power on the unit in the dark room then shine with the flashlight directly in the screen, you will barely see the images. This is ...

...sony logo ligths on for 4 second and then turn off and the standby ligth (red) starts to blink i already check the fuse,capacitor there is no puffing.do you have any idea solve my problem.should i ...

...10 volts dc higher . begin with control on the power supply first of all. Sony Bravia TV kdl red blinking led light error codes solutions Sony KDL 40XBR4 KDL 40XBR5 KDL 46XBR4 KDL 46XBR5 Service ...