Questions & Answers for: something block paper feed tray

...paper or something else. I am willing to bet you will find some jam. I would also switch it off, and wait a while before turning on and printing again. Good luck My printer is only a month old. I was ...

pull the paper into the machine with rubbing alcohol and see if that solves the issue... if something is blocking the paper... take out your tray... drum and developer and search for the obstruction..

...paper detection in the bottom tray which might be defective or the lever that serves this sensor might be out of its socket or even broken. you might need to take apart the printer to find this out. ...

...paper that it's processing out to prevent any other jams during the printing process. Your rollers must have something jamming it's movement during printing. You will need to open the printer through ...

something is blocking paper from getting to rollers. Have tried to hand feed to rollers when when calling for a sheet, all does is pull it down and then feed straight through and out no print. Printed

...something may block the paper feed tray from opening. If the printer is surrounded with documents or when you copy large documents such as books, make sure that you secure the clear space in front of ...

Something may block the paper feed tray from opening. When you copy large documents If you command printing when the tray is covered, the 6000 error occurs. **If you need any technical help on printer

...something inside the printer is not allowing or not feeding the paper through properly , either a motor isn't kicking on, paper is not being picked up from the supply tray properly or there may be ...

paper scrunched up after a REAL jam, or fault sensor arm. If you find something and can remove it, reassemble, and test You have to select the correct type of paper, A4, or in this case the machine is