...solo channel and main output. REMEMBER that the MAIN 1/4 inch jacks are TRS balanced and plugging a mono cable into these OR st the other end plugging into a MONO will short out the balanced line ...
Question about Europower Pmp5000 Powered Mixer Pmp5000
...Solo with an earphone jack under the right corner of the organ keybed. I have lost the original earphones and can't find one to fit into the jack. Do you know what size the jack is? There are only a ...
...1) Does this effect the functioning of the "solo" at all? (ie is the light on always but without effect and can you select solo using the pushbutton?) We need to determine whether or not the problem ...
1/4in phone jacks. Use whichever amplifier input level your amp has. If you are not using it as a main PA house mixer, but using it for recording, the main output connectors go to a 2 channel recorder
problems with fishman solo amp Just boughtcSA220. The XRL on No. 1 channel not working. Tried to different mice.
...solo singer low volume always have volume at 2o clock just guitar vocal backing tracks checked fuse ok leads all ok no blue light no sound ---help steve I believe there is an internal fuse in these ...
...1 CHANNEL WORKING ON PA POWER AMPS WORKING FINE First, I would make sure the mute buttons are not on. Then I would also make sure that none of the solo buttons are on. If one is pushed in, only that ...
...Solo Tube Series T64RS: Channel 1 (which I assume is the clean channel) will cut in and out and the light will dimmer with it and it makes a fuzzy poof sound each time it kinda goes out. Also it will ...
Question about SA220 Solo Performance System Speaker PA Active
The Clip LED on Channel 1 of my SA220 is on continuously even with nothing plugged in the XLR or 1/4 inch inputs. Not getting amplification when inputs are used. Why? Why is channel 1 clip LED on ...
Question about SA220 Solo Performance System Speaker PA Active
...solo indicator light comes on. I have been trying to run XLR, 1/4 line, 1/4 line from ipad, direct line in from roland synth module ...and nothing. I need help As long as your power supply is ...
Usually answered in minutes!
297 Questions
192 Questions
155 Questions
161 Questions
136 Questions