Questions & Answers for: solo 1

Mi cinego d-1ooo se apaga solo aproximadamente 1 hora despues de encendido esta nuevo y se apaga solo por lo que no puedo ver un vodeo completo,p?r favor ayudame si sabes que es lo que le sucede. ...

...1 channel or not , becouse i like to buy kicker solo X 5000W. please let me know [email protected] HI qq_lando, Yes, you can get good bass from this setup. The Boos amp can handle 1 ohm but no ...

...SOLO BACK PACK LEAF BLOWER AND NEED TO KNOW THE PROPER OIL TO GAS MIXTURE 100:1 or 50:1 The mfg states that it should be 50 to 1 mix of very high quality oil. I have the manual in front of me and it ...

What amp need to use for Kicker (2) S12L7 12in Solo Baric I have a 2 12" kicker L7 in a ported box. What type of amp and requirement rms that I need to run those speakers you should use an amp with ...

...solo's. if i do buy the 4ohm drop each to 2ohm then hook them both to the amp pos+pos and neg+neg straight to the amp will the two drop each other down to 1 ohm ? this web site will help ...

i cant remember how to install the kicker 12 l7 Your subwoofer is single or dual voicecoil? And what amplifier Make/model are you putting it on? Thanks!

Solo do the following. 1.Press and hold AUX 2.press # pound 3. Press the + side of volume 4. Press 0 5. Press pound ( AUX button will flash 3 times) 6. Press SAT mode 7. Test the volume on Bose Solo.

solo 471 blower and i need to know what the gas ratio is .I just bought this used and don't have a manual .is it four to one or two to one 50:1 if that is too rich use 30:1,but try the 50:1 first.

problems with fishman solo amp Just boughtcSA220. The XRL on No. 1 channel not working. Tried to different mice.

...solo motosage type 60135 ,number 157659 Some say 100:1 with synthetics. I use synthetics on 80cc and larger saws in the range of 40/50:1. I never go higher than that....saws are just too expensive to ...