Burrs How do I change the burrs on my solis 166? Thankyou you can see at http://www.youtube.com/watch?v=qu4t1uzOrF8 just you need to continue opening 2 part more than in 5 min and 40 sec, there you go
clogged My Maestro grinds all right, it is just that nothing comes out at the other end. It all collects around the rotating grinder, eventually clogging it. Solution??? The burrs need to kept clean ...
...solis conical burr coffee grinder, one screw under specs sticker is open it is still closed solid. I don't see other screws. The grip pads seem not to have screws under them (they don't really come ...
Question about Maestro Electric Burr Grinder
...Solis Maestro for more thorough cleaning. I need to get beyond the top burr removal stage. Hi Rotate the bean hopper counter clockwise until it stops. Lift the bean hopper out. Remove the outer burr ...
remove the inside conical burr I need to remove the inside conical burr so i can replace the paddle wheel underneath. I tired to grip it with vise grips but they slip off and if I do tighter I may ...
Question about Maestro Electric Burr Grinder
...burr. Install the bean hopper. Rotate the bean hopper to the French press grind (coarsest) and operate the grinder. This will clean the burrs and the passages. If it starts to clog, repeat the last ...
...Solis Maestro Plus Typ 167 coffe grinder. I have set it on the finest grind and yet it is only taking about 10 -12 secs to pull 30ml of espresso, way too quick (used to have on ESP setting and worked ...
Question about Maestro G385 Electric Burr Grinder
...Solis Maestro grinder and re set it to a fine espresso setting but the grind is coming out very course. What should i do? Hi Your burr is not locked in. You need to remove the beans from the hopper. ...
timer knob is broken, I need a replacement timer knob for my solis grinder is broken, I need a replacement Hi Contact Baratza at 877-701-2021 They should be able to help.
Question about Maestro G385 Electric Burr Grinder
...grinder upside down. Rotate the bean hopper to loosen any grounds that might be holding the burr holder. Now remove the bean hopper and try again to remove the holder. Only the outer burr comes off, ...
Usually answered in minutes!
1,392 Questions
801 Questions
725 Questions
572 Questions
453 Questions