Questions & Answers for: Hampton Bay solid works

...than others. There are some steps you can take to reduce the hum: * If you are using the fan with a solid-state control (i.e. a dimmer), that will cause the fan to hum. These controls are dangerous ...

...How do we fix the down light and eliminate the initial flicker? Also, the fan comes with a solid-state remote device and the manual warns not to use a solid-state remote device. Why do you ...

...to my ceiling fan using the enclosed instructions however the bulbs burn very dim. The wiring seems solid (grey to white(light kit) and red to black(light kit). Soundes like you might have a loose or ...

...If you aren't good with electrical, get an electrican to run power for you. The hanger must be SOLID & the wiring

...slow setting is almost at a stop. The lamp is working just fine I just have no idea. please help. Solid-state controls change the level of power in the fan motor to control the speed of the fan.

...it was working just before. Its an old house. I checked the connections to make sure they appeared solid, but still no luck. What could the problem be? Hello, Many times with very old wiring the

TRying to balance ceiling fan but there is only one balance clip that came with the product and it is difficult to fix the wobble Ballancing a ceiling fan is a trial and error situation. you can use ...

...for a short time ..currents can go so high that they damage the "triac" (like a transistor) in the solid state controller (the electrical brick inside your fan) ... often the triac fails shorted ... ...

...nut connection that is just barely connected. Perhaps it's a connection between stranded wire and solid wire where only one of the strands is making contact with the solid

...delta) insulated wire, sometimes other colors, but never green, gray, or white (whether these are solid colors or stripes). Specific exceptions apply, such as a cable running to a switch and back ...