...hold GO and turn power on 4. When all 3 lights lit release and press GO twice 5. All lights turn solid 6. With all solid, press GO 5 times 7. Ready light GOes red 8. Close door and you're all set
...working My brother HL1440 in not printing and the Red and Yellow lights on the control panel are solid. What does this mean? Toner is MT. see what do my do my lights mean in Wiki
...are lit, release the GO button Press the GO button 2 times. This will cause the LED's to light solid With the LED's lit solid, press the GO button 5 times At this point the Paper light should be ...
...hold GO and turn power on 4. When all 3 lights lit release and press GO twice 5. All lights turn solid 6. With all solid, press GO 5 times 7. Ready light GOes red 8. Close door and you're all set ...
...hold GO and turn power on 4. When all 3 lights lit release and press GO twice 5. All lights turn solid 6. With all solid, press GO 5 times 7. Ready light GOes red 8. Close door and you're all set ...
...is also weaker in the same 1.5 inch stripe. David Bendah i'm not sure if you're talking about a solid black band or a bunch of little stripes running down page. does it happen when you run an ...
Question about MFC 7420 All-In-One Laser Printer
Solid black line down the document when scanning Have a Brother MFC-7420. When I scan, there is a solid black line down the document about 2 inches from the right margin. I've cleaned everything and ...
Brother printer prints solid black on one side I have a Brother laser printer HL 5240. It has worked fine until one day it started printing solid black on page. What is the problem? This is caused by ...
status light solid red not printing Hello the status light is solid red not printing. Cleared no paper jam. Toner & drum new. Having messed with for 2 days now can not figure it out. Was working ...
Usually answered in minutes!
1,135 Questions
1,072 Questions
1,012 Questions
767 Questions
733 Questions