Questions & Answers for: Jeep solid state

...a solid state relay. If the car overheats while engein runing and fan will not go of wend you remove key the computer is not good need to replace if you are in the nyc are i can help with this ...

...solid state relay, the relay is located behind and below the left headlight, the headlight must be removed to access it, check also for melted wiring at the fan motor and the relay module, this is so ...

...Pressure Sending Unit on a Jeep Wrangler 2000 6cyl so i can replace? Oil Pressure SensorThe 3 wire, solid-state engine oil pressure sensor (sending unit) is located in an engine oil pressure

solid state module that will allow the lights operate correctly. It plugs right in the factory socket, no cutting of wires are needed, and it costs around 40 dollars. It is the only way to go for your

...the solid state relay beneath the passenger headlamp. If you mean the blower fan for the heat an A/C you will need to replace the blower motor resistor and possibly the resistor wiring /

solid state fan relay, this can also cause the relay to short and supply continuous voltage to the fan assembly. The relay is located below the passenger headlamp but you will need to remove the front

...it all go through the circuit breaker on the top of the radiator. need to check the cooling fan module. it is a solid state relay so you can only check for power going into it and coming out of

my coolant fan stopped working on my 2001 jeep grand cherokee have it checked witha scan tool may be the solid state relay under the right side head lamp

...solid state fan relay. Google search solid state fan relay for you vehicle and you will find all kinds of info on what to do. There are also videos on youtube. The relay should be behind/under the ...

...the meter shows a P1491. What is this? Radiator Fan Control Relay Circuit An open or shorted condition detected in the radiator fan control relay control circuit. This includes PWM solid state ...