Questions & Answers for: Hunter solid state

Re wiring The ceiling fan fell and I have to put it back up. I have a black and white wire, a solid white wire and solid black wire extending from the fan and fixture combo. Any knowledge on how to ...

...solid state design, light weight and instant on. The Home Depot ballast is the heavy transformer kind and a real pain to modify the bracket to make it fit. I have 8 of these Hunter fans and I have ...

...solid state fan. Manual adding lite kit to 1980's Hunter solid state fan. Manual or how to? Two wires are there to add lite to but no power. Control says for Solid State fan and the two leads (both ...

...Rail Fixture, but th wiring in the apartment is old, but th problem is that in the ceiling is a solid round looking ''outlet box'' but in th instruction manual it says to conect the bolts to a ...

solid state, rated for 3 or more amps, regular fan controls will not work as your fan draws 2.5amps on high, not even new ones that are labeled for the Original. 2. Retrofit the fan to make it a three

the lights on my fan blink but are not solid. I have tried replacing the bulbs with no luck so i opened the cover revealing the wire harness to see if somthing came unplugged. none of the wires look ...

...fan blade and bracket from unit. remove blade from bracket. put the down side of bracket on a very solid surface and apply downward preasure. Now go easy, its a soft metal, and might be cast, but ...

purchased state street brushed nichole hunter fan 52" with remote control installed working fine. cannot turn off and on by wall switch only remote control can this be fixed Something got wired ...

wattage limiter hunter ceiling fan As per the Energy Policy Act of 2005, all ceiling fans manufactured or imported into the United States must utilize a light bulb wattage limiter as of January 1, ...

part 85112-04number need a replacement part for remote on fan I fixed my 85112-4 receiver. another person stated the problem was a triad shorting out. found the part and seen what it was. i ...