Questions & Answers for: soldering iron kits

...soldering iron? Where soldering irons have a heating element that heats a copper or alloy tip; in a soldering gun, the tip is also the heating element. Most soldering guns are hot enough to solder in ...

Butane Charging of Portasol Must you use only Weller Butane cylinders to properly fit the Portasol charging port ? Will other Butane cylinders not fit properly? butane is butane it all works

can not remove the interchangeable tip its stuck plz help Heat up the unit and use pliers to loosen the tip--be careful

...soldering iron,desoldering pump ******,solders and must know basic soldering skills to replaced the 2 STK convergence ICS and it supporting resistors.Many attemp to do this some got the tv work,other ...

...soldering over copper foil to broken china. 25 watts is a pretty light iron for the kind of work you are doing, but if it works---. Tips that are just bare copper tend to erode over time (the heat ...

...soldering iron for melting solder mainly to connect electronic components to circuit boards. To use it you plug it into the electricity mains and press the trigger. This causes the metal tip to heat ...

have the same soldering iron and have found for this problem, the replaceable tip has worn out.All you need to do is buy a replaceable tip of your choice. The tips are a consumable part that wears out

...down it goes up to 902 I had the same problem with mine. Try pushing or twisting the cord entering the soldering iron pencil. The temperature sensor can become disconnected if the cord gets

Although I had only used my Dremel versatip once I am told it may not be holding the solder due to oxidization, how can I clean the tip of the iron I have tried cleaning it on a damp sponge as it ...

...soldering iron and whats it for? If the gauze came as part of a kit with the soldering iron it is de-soldering gauze. You put it on a joint, heat it up with the soldering iron and it soaks up the ...