Questions & Answers for: Vtech soldering

vtech 5808 my phone keep dropping the calls in the middle of a conversation and shows 'searching for base' all the time. i have tried changing the batteries, but still no gain.what could be the ...

mouse stopped working was working fine but it stopped My daughter's Vtec laptop had the same problem. The black wire in the base of the mouse had broken off and had to be re soldered. To open the ...

Tote n Go laptop, mouse click not recognized In the Tote n Go laptop, when I try to select an activity by pushing the number and selecting the same through mouse, the mouse doesn't respond to the ...

phone was dropped, not working at all thats all No worries. Breaks a solder joint. Makes an open or closed conection. EASY

...unit up recently and saw the problem: detached wire from the speaker. All it needed was a little soldering to attach the wire back to the speaker and presto! The sound was on

the handset receiver was dropped and there is no longer a lighted background display. Is there an illumination bulb inside the handset? They are LED diodes, of the microencapsulated site. You can get ...

...speaker. The speaker itself is labeled + and - so you know where to put the wires. Only requied a soldering iron(Walmart 9 dollars) because the contacts on the speaker came with a glob of solder on ...

KidiJamz Studio microphone wiring Need wiring schematic or guide for the 4 microphone solder points correlating with the 4 microphone cable wires (1 black, 1 red, 1 tan/orange(?), 1 ground wire) for ...

...points total). Issue fixed. FYI: reflowing solder just means heating each solder point (with a soldering iron) until the solder gets soft and then removing the iron to let the solder cool and ...

...points total). Issue fixed. FYI: reflowing solder just means heating each solder point (with a soldering iron) until the solder gets soft and then removing the iron to let the solder cool and ...