...paste set. Step 4 Solder the other end of the ninth wire to the uppermost contact on the left side of the Mod chip. Solder the other end of the eighth wire to the next uppermost contact on the left ...
...solder joints to crack / melt. With this happening, the system is unable to boot up. Reflowing / Re soldering the processor and applying new heat paste will solve this. We offer this repair service ...
...solder joints to crack / melt. With this happening, the system is unable to boot up. Reflowing / Re soldering the processor and applying new heat paste will solve this. We offer this repair service ...
Question about PlayStation® 3 (80GB) Console
paste Smd air sodering station Soldering Flux Soldering skills So, your ps3 is cracking the bga solder under the ps3 CELL and RSX processors..to fix you will need to reflow these components with care.
...solder on the board to melt and bridge. The system needs new thermal paste and needs to be professional reflowed. Check out www.wiredextreme.com or call 1-888-389-3038. We are a professional console ...
solder by heating the board up (delicately!) with 600C heat gun. Also cleaning the processors with turps and reapplying the right amount of thermal paste. Here is a disassembly guide http://www.llamma
...solder is under the CPU and must be heated up. It is lead free so it needs more heat then lead and you need to add flux. I would start by getting the board out. Remove the thermal paste off the CPU. ...
Question about Playstation 3 (PS3) Console
...solder is under the CPU and must be heated up. It is lead free so it needs more heat then lead and you need to add flux. I would start by getting the board out. Remove the thermal paste off the CPU. ...
...solder is under the CPU and must be heated up. It is lead free so it needs more heat then lead and you need to add flux. I would start by getting the board out. Remove the thermal paste off the CPU. ...
Question about Playstation 3 (PS3) Console
...20gb 40gb 60gb 80gb.okay these consoles are all dying.see when sony made these they did lead free solders for the cpu and gpu and they used crappy thermal paste on these processors.so now when your ...
Usually answered in minutes!
27,926 Questions
9,005 Questions
4,769 Questions
1,255 Questions
1,155 Questions