Questions & Answers for: Microsoft solder paste

no sound and purple lines running down the screen the system turns on fine but there is no sound and these purples lines just run down the screen Hi, this is caused by overheating on the memory chips.

...paste such as arctic silver, add a team xecuter 3rrod repair kit and then go over the board with a heatgun to re-seat all the solder and pads. we offer a repair service if you cant do this yourself ...

...paste and then you need to re-heat the whole board. We use a special IR over which re-bakes everything and re-seats the solder properly, a lot of people use a heatgun but you have to be very careful. ...

solder on the mainboard and replacing the heatsink paste with new. e73 errors when searched for on the net say its something to do with the ethernet port BUT ive found it to be the lead free solder on

...solder ball joints to fill the hairline cracks. Depending on which chip is the issue you may also need a 2000 watt heat gun instead of using the over heating method (the gpu chip). Replacing the heat ...

paste? Did you allow the GPU to "bake? After you do the xclamp fix, it is good to position the fans onto just the CPU and let the xbox run so that the GPU overheats, and this "reflows" the solder. Let

paste etc. Keep bolts as loose as possible to avoid the motherboard bending and breaking the solder points. While you're at it, make sure the fan and heat sinks are clean. Dust won't help get the heat

...paste and tried reflowing the solder but I still get an error 0102. What am I doing wrong? try changing the game box because high tempetur can do that Try to keep bolts as loose as possible (or just ...

...solder and we usually reapply fresh thermal paste. Some people also have a new clamp system they put on the mainboard.4 lights - means the av cable is not plugged in correctly.Youll need a few things ...

...paste off the cpu and gpu and tried to run it, you might have caused permanent damage that can not be fixed. You can try again. One of the reasons you get the ring of death is the solder joints under ...