Questions & Answers for: Buick Skylark socket for lamp

rear brake lamps All lights are working except for brake lamps. The third stop lamp comes on, but not the two main ones. I put on a new stop switch and changed the lamps. Also changed out the 20 amp ...

...block and screws into bellhousing. You will need a long extension (2 to 3 feet) and an 18mm wobble socket to get to it. It is located on the firewall side of engine. Remove right side tire and using ...

my transmissin pan bolts are loose and i cant get to some of the bolts because of a bracket in the way Either remove the bracket,or use a swivel socket,or universal with a socket.10mm,or 8mm.

...lamp socket either by rotating it counterclockwise (approximately 1/4 turn) until the plastic tabs disengage, or by squeezing the metal tangs while pulling the socket from the light assembly Remove ...

...lamp,,Secondly if anybody has changed rear bulbs or attempted to fix the problem may have inserted a single contact (21W) indicator/turn signal bulb into the Twin contact brake/tail light socket in ...

...(ground) wire coming into the fan motor relay. There is 14VDC present on the coil side of the relay socket with relay is pulled but the voltage drops from 14VDC to zero VDC when the relay is plugged ...

...first remove the belt. The alternator is held in place by two bolts and one will require a 13 mm socket to remove it and the other one requires a 13 mm wrench to remove the nuts while holding the ...

The gear selection lamp, inside the instrument panel, does not reflect the actual gear I am in. It jumps around, depending upon which gear I select. It is rarely accurate. I know what gear I am in ...

how do i adjust the headlamps on my buick Open the lead on the front car. Inside you should see on headlamp some screws attached on the lamp from this screws you can adjust left, right,up and down ...

i have a 73 buick apollo with a wiring issue. when i turn on the head lamps the break lights dont work when i turn off the head lamps the break lights then work. and either way my rear blinkers dont ...