...drawer's cells (following the programmed cycle) by a lever's movement (part of the dispenser). The lever movement is controlled by two solenoids that received their power from the timer. By opening ...
Question about GLTF2940ES Front Load Washer
...drawer retains water, the door often leaks, water does accumulate in the door seal and the spin has broken twice on us and the machin is only 15 months old! Repair is contracted out by Lowes to ...
...soap drawer, remove 2 screws in the control panel that secure the soap box, depending on model there could be a third in the lower right hand corner, if there is, remove it. If there isn't read on ...
Question about WM1812C Front Load Washer
...drawer open after a wash, and the door open more than 2" on these machines to prevent it, and a hot wash occasionally for whites. Tell the manufacturer that you won't be buying their brand again. We ...
...drawer and the two screws visible behind it. 5. Pull the top of the electronics panel away from the machine and lift up - place on top of machine or hook it out of the way 6 Remove the 4 screws that ...
Question about WM1812C Front Load Washer
...soap. He left the door open after usage to allow the unit to dry out, and tried different cleaners, to clean out the sludge build up. We determined that there just is not enough water to thoroughly ...
Question about WM1814CW Front Load Washer
...soap is not in the dispenser when finished but there is some water in the dispenser that doesn't drain. Hi from retired Englishman in SW France, I'm going to offer 2 possible solutions, both of which ...
Question about WM1814CW Front Load Washer
...Soap Dispenser drawer in my LG Front Load Steam Washer. I had a horrible mold/mildew smell coming from my washer - I always leave the door open after I've run a load, and the smell did not seem to be ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions