...snap out (may be stuck in with accumulated goo). I used a shop vac to clean this area but sponges and tweezers would do, check for damage to the screen and blade. Inspect wash out and reassemble ...
...it go and where's the "loop" thing? These are pics of the two bits of the part: The top obviously snaps into the bottom but other than that, I have no idea. There's no part # (of course), just a
...chopper. When you put screws back always go in reverse til the screw drops to match the threds. Take off the back to upper water line that comes from the pump. You can pull up the black #5 one way ...
...chopper assembly shaft had snapped in half, the scraper was not rotating to clean the screen so it was completely clogged. called the local parts supplier and they had the part in stock for $25. I ...
Question about PDP-42BK 42 in. Plasma HDTV
snap-together case. Opening the case, I saw the wire had melted and there was a little bit of black residue, but not what I see from really bad shorts. I soldered a 6.5A glass fuse to the posts of the
...snap off plastic cover at electrical end to expose cooling fan. Grip fan blades and try to turn impeller on opposite end. If it turns then we have the correct problem.Proceed to clean any ...
Usually answered in minutes!
915 Questions
809 Questions
800 Questions
690 Questions
469 Questions