Questions & Answers for: smoke petrol chainsaw

...petrol / oil ratio ? Hi, Most chainsaws use three mixes, which are 32:1, 40:1 or 50:1. Most are labeled somewhere on the saw. If you are unsure, use the 40:1 and watch the smoke, too much smoke use ...

Ad

Question about Pro 42CC 2 Cycle Chainsaw, 18"

1 Answer

how to put gas and oil in it. how u start a poulan pro saw it's one fill of petrol to one cap of two stroke oil. If you want to put in more, that is no problem, but it will smoke a lot!

Ad

Question about Pro 42CC 2 Cycle Chainsaw, 18"

2 Answers

...petrol before it goes in chain saws are 40:1 3.2 ounces of 2-cycle engine oil per gallon of gasoline most two stroke engines are either 50:1 or 25:1 i would suggest you use 25:1 or 200ml per gallon ...

Question about Pro 42CC 2 Cycle Chainsaw, 18"

1 Answer

...smoke is coming from the engine check your fuel. You should have petrol mixed with 2 stroke oil. The saw manual will give the ratio of 2 stroke oil to petrol. If you use too much oil or if it's not 2 ...

Question about ZR10926 16" Chain Saw

1 Answer

...smoke from the exhaust, and that is because it is burning oil, and the oil can only come from the petrol ,so you need to refill the fuel tank with a fresh fuel/oil mix good quaility oil at 50-1 and ...

Question about ZR10926 16" Chain Saw

1 Answer

smoke and then it was choking out. Now it won't turn over/ start. There may have been too much petrol going into the engine, possibly caused by having the choke on. Ensure the choke is not engaged

Question about ZR10926 16" Chain Saw

1 Answer

...petrol. I did work it quite hard. I took the spark plug out and cleaned it but it still wont start. Any ideas? Two things come to mind. The ignition coil burnt up or the condensor failed. You did not ...

Question about ZR10926 16" Chain Saw

1 Answer

...petrol. I have cleaned the plug. Any ideas? New plug? What else have I likely damaged? Thanks Its unusual for a saw to start actually smoking, are you sure the chainbrake has not come on and you have ...

...chainsaw which wont start. I have a spark and fuel getting thro. Brand new, but been stored in box for 2 years. Tried warming plug, pulling through 8 times with everything off, then trying again. No ...

...smoke a problem? 3-what should I do? thanks Nicola Hi, 1. The chainsaw has an oil reservoir which lubricates the chain in use. Using it a lot will cause sawdust to stick to that oil. Remember to top ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

john h

Level 3 Expert

29494 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...