Questions & Answers for: Konica Minolta Magicolor smart chip

All four toners are saying that they are not installed I tried new cartidges still no luck. Clean the contacts on the chips and what reads the chips. What is up? Take out the chip reading contacts and

Konica magicolor 2400W Ineed to know how to clear the chip so I can refill the cartridges with toner. Also is there a chip resetter for this laser printer? To clear chip after refilling toner ...

toner showing empty I have refilled my yellow cartrige and replaced the chip and it shows full on the indicator. The screen tells me to replace the yellow cartrige. Help me. Mary [email protected]

cartridge not detected we have done that and changed the chips several times but the machine will still not recognise the cartridges. Minolta say tough you should be using brand new cartridges not ...

Minolta 2400W - Put cyan / black toner I have disabled most pop-ups in order to extend toner usability. Atfer a recent reboot, it has repeatedly asked for either cyan or black toner cartidges to be ...

I have a konica Minolta Magicolor 2530DL and I just refilled the toner and now I cant get the new chips to read. I want to know if there is a way of disabling the chip so I can print. I know I have ...

chip you can put on the toner cartridges on EBAY will yield you a working solution should you need new smart chips for the cartridges. If the cartridges are Konica Minolta new I would contact whomever

smart chip on the toner cartridge. If you refilled the toner yourself the new Magenta toner smart chip must be replaced. If it is a new cartridge turn off the printer, disconnect power, and reseat the

we just? replaced the cyan toner with a OEM cyan and two days later it says it needs to be replaced again A lot of printer cartridges have microchips which make them unusable once the machine believes

How to reset the toner counter chip? There is obviously some toner left and I'd like to use it up. a small pcb on the cartridge contains a serial chip that counts.it can't be reset. Minolta ...