Questions & Answers for: Meade slow scroll

right ascesion slow motion control knob loose, does not work Hi, first time used my telescope in couple years, watching Jupiter, keeping in center with dec. slow motion knob and found RA ascension ...

Calibrating & Aligning the Meade 10" LX200 GPS Telescope in the Southern Hemisphere I am a recent proud owner of a brand-new Meade LX200 GPS (10") telescope. Living out here in Zambia, Southern Africa

etx-ls update to 1.2g failed, how to i restore or try the update again the autostar iii handbox does nothing Easy. If the firmware in your Autostar crashes and you cannot access the "DOWNLOAD" menu ...

I have a frozen autostar 497 handbox, can it be reset or saved? While doing an update, the updater program window asked if the handbox was in ''safe mode'' (I think it was something like that), I ...

blank screen no screen output at all after a software upgrade Did you update the 494 controller improperly with 497 controller firmware. You must use this updater software : ...

lx50 hand controller will not work in north and south direction in the slow speeds The altitude clutch is slipping. The scope forks must be dis-assembled to check the clutch inside the fork arms. Go ...

hi guys my telescope will only move up and down in the asention. it will not move left or right and motor fault scrolls across the controler. its a lxd55. can you advise me please. Are you using a ...

whene I power up the LX90 the initial messages scroll through very slowly,about 1 character every 2 seconds.After flogging through this the scope moves ok.Any ideas? The up and Down scroll keys are ...

I have a Meade ETX-70. When turned on, the handset says there is a Motor Unit Fault: Motor failure detected due to moving handset between scopes, low battery level, obstructed or overloaded scope. ...

Ime looking for a meade LX200 users manual that comes with the scope Most Meade manuals are available on their support site: http://www.meade.com/support/manuals/ . Scroll down through the list for ...