...door you must remove the back, to remove the back you must remove the top of the grip (shutter button and dial and WT lever). remove top of grip... 1) starting at the bottom of the plastic strip ...
Shutter door does not open automatically When turning on the camera ... the lens extends but the shutter does not open ... it will slide open with slight manual pressure Hello, just recently ran into ...
...sliding door that powers on the camera and covers the lens? There is a metal plate with two screws on the bottom of the sliding door that holds the door to the camera, try tightening the screws and ...
...door you must remove the back, to remove the back you must remove the top of the grip (shutter button and dial and WT lever). remove top of grip... 1) starting at the bottom of the plastic strip ...
sliding it to the right to make sure it is making a good connection. Try to make sure the cartridge door is shut firmly as to open the Laser shutter which allows the laser to write to the drum. If the
...door does not open and let light come through There is supposed to be a spring on the shutter that snaps it open when a slide is in the gate. It sounds like that spring is either broken, unhooked or ...
...shutter button. But if you want to fully restart your camera you must remove and then re-insert the battery pack. To do so slide the door on the bottom of the camera to the right (right defined as ...
Plantation shutters over sliding glass doors swing loose on the bottom. plantation shutters is the best choice for cover glass window and also useful for security purpose.As per my suggestion allstar ...
Question about Carousel 4600 Slide Projector
...shutter ("door" you refer to) should be spring loaded - the spring will snap the door open when a slide enters the gate. Usually, if the shutter fails to open, it is because the spring that tensions ...
Question about Carousel 4600 Slide Projector
...shutter door stuck closed. Both the remote and side buttons forward but won't reverse-both reverse buttons forward why ? Removed btm case, the spring is attached to shutter door next to case wall. ...
Usually answered in minutes!
1,383 Questions
1,133 Questions
959 Questions
944 Questions
808 Questions