Questions & Answers for: Honeywell slide control

...control for the cool. On the left side on the bottton of the unit is Auto---On The right side is Off Heat Auto Cool I set it to Auto and Heat and put the top gage to 80 degrees and the unit will not ...

...control can not be moved. I tried to hold the dial and slide, no luck. I tried to hold and use a screwdriver to push them, no luck. Are they locked in place, i.e. Need to push them in, pull out, etc ...

not adjustable, sounds like the LED is going bad. Tstat has battery back up for power outages. If you slide the fan switch from auto to on does the blower motor start? If not control problem with unit

...slide control call time set then a slide control for heating then the last one hot water the slide control for heating and hot water have settings for off continuse twice and once. I would like to ...

...nothing happens. I turn off the thermostat inside the house and unplug the unit as advised. I then slide a black switch from off to on, plug back in the unit and turn the indoor thermostat on heat ...

...try to adjust. Set at 90 and 120. If it is off a little move the temp up a little. Should have slide dial under the lid on the fan limit. Keep in touch ...

...or turning it back on will not automatically reset the refill sensor. You must depress the restart slide switch on the bottom front controls to reset and restart the unit, or..... 2. It the refill ...

...control, pilot and thermocouple will all slide out together along with the burner. If there is a spider web inside donot blow it as it will not blow out. You will need to run a peice of a metal coat ...

the fan limit control switch on furnace is not working proper can you clean the device yes you can remove it and clean the back undo 2 screws and it will slide out

...control developed an issue where it will not shut the fireplace off. I have to do it manually. It still turns it on and adjusts the flame and fan but I have to turn the switch to manual and then back ...