Questions & Answers for: slave clutch

Ad

...clutch slave cylinder blew out repalced slave while bleeding blew out again Could be a couple of different things. 1) your clutch master has a plugged pressure bypass, and it is sending excessive ...

Ad

Question about 1988 Accord 4 Door

1 Answer

...clutch cylinder or a slave cylinder. Bleed clutch at bleeder screw on slave cylinder and make sure there is pressure from master cylinder. If there is pressure then slave cylinder may be bad replace ...

Ad

clutch slave and master cylinders, and bleed well. I've also had this happen. possible problem is a bad slave cylinder or needs bleeding or a bad master clutch cylinder Pull back the boot on the slave

Question about 1998 Ranger SuperCab

2 Answers

...clutch slave cylinder. Remove the clutch slave cylinder. Examine the clutch slave cylinder looking for a damaged or worn boot, a damaged or worn bearing, or leaking fluid. Examine the clutch release ...

Question about 1992 Accord

1 Answer

...clutch slave hopefully. check clutch slave fluid, its next to the brake fluid reservoir. it takes brake fluid try bleeding the clutch slave. if it wont bleed then you will need a new clutch slave. If ...

clutch slave cylinder time to replace both the clutch slave and master cylinder clutch slave cylinder is possibly leaking. do a visual check. with help of another person , without vehicle running have

Question about 1996 Accord

1 Answer

...clutch slave is installed correctly, is this slave internal or external. in other words can the clutch slave(the part that pushes clutch fork) be replaced with out pulling the transmission? what ...

clutch slave cylinder or cable operated clutch. Second the slave cylinder is on the end of the lever that goes into the clutch housing Before you change the clutch make sure that the problem is not in

...clutch slave cylinder down on the bell housing of the transmission, with a steel tube running from the master to the slave cylinder. When clutch pedal is depressed, hydraulic fluid (brake fluid) is ...

...slave cylinder when clutch pedal is pressed, and moves the clutch fork a small amount- about an inch or more. If the slave does not move the clutch fork, check the fluid level in the clutch master ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

john h

Level 3 Expert

23438 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...