Questions & Answers for: Jeep slave

...clutch for jeep wrangler 2000 I have a 2000 jeep wrangler, just replaced the master clylinder and slave cylinder but i continue to have problems after my jeep sets for awhile, the transmission will ...

replaced master and slave cylinders for clutch and can't bleed the system. The bleeder screw on the slave cylinder doesn't appear to work. Does it need to have a plug removed or hole drilled in it to ...

...im having to add break fluid for my clutch daily but can not find a leak anywhere Check around the slave valve under the car on the tranny. There is only 3 places it could leak The clutch master ...

...pressure to shift. I keep it full of brake fluid. I can see no leaks. Thanks for any help. leaky slave or master cylinder - if you have someone listen to the slave cylinder while you press the ...

slave cylinder leaks clutch slave cylinder leaks what does it consist of to change it Remove the bolts holding the slave cylinder to the transmission. Disconnect the hydraulic hose. Reconnect ...

I need to bleed the clutch slave cylinder but just not sure if I am loosening the right part. Can't find any pictures. There is only one bleeder valve on the clutch slave cylinder so you can't

Where is the slave clutch location on my jeep, the slave is on the left side of the trans to find it, find the clutch MC , the follow it to the slave bingo. mr.slave. (wont work on a 1988 cherokee ...

Location of slave cylinder on 2005 Jeep Liberty On the drivers side. under the vehicle. Mounted to the transmission. I recommend you replace the master cylinder also. Mounted to the firewall. if its ...

...where they belong and still nothing im answering a 2nd time. the part time has a vacuum motor (a slave, vacuum servo actuator not unlike you see on HVAC but stronger it is) so of the motor

slipping clutch R&R is all you can do . that means the clutch is bad.
unless the slave was to seize, stick out.
no year car stated (a hopeless post ever there was)
1993? ?????????
no ...