Question about Washing Machines
...slam lid it works...I shouldn't have to slam lid to work,is something blocking it?thanks!Debra sounds like your lid switch is loose ..look at the tab that sticks out of the lid and watch where it ...
Question about Ultimate Care II LSQ9564J Top Load Washer
...slam lid down to get washer to start The switch associated with the lid must be out of place or something because you have to really slam the lid to get the washer to start. Is there a way to adjust ...
Question about Ultimate Care II LSQ9564J Top Load Washer
...slam down the top door to the washer, it starts. Any ideas of what is going on with the washer? At this time we can't afford a new washer. Any suggestions would be appreciated. Thanks, Diane I think ...
Question about Ultimate Care II LSQ9549L Top Load Washer
...slam lid my washer fills up then stops unless i slam the lid then it will start agitating is the lid up during the filling process? the new washers will not agitate unless the lid is down. no need to ...
Question about Bravos MTW6600T Top Load Washer
...slam the lid anymore 3. Since my Lock switch (2nd switch), which is engaged with a magnetic, is working, my work is done. If you find that your machine is still not starting the cycle after jumpering ...
Question about Neptune FAV6800AW Top Load Washer
...Lid takes long to lock once I hit lid locks or slam lids down it locks Once I slam the lid ! down ! then it locks and starts to wash it should start easily ,the lid switch may need to be ...
...slam the lid anymore
3. Since my Lock switch (2nd switch), which is engaged with a magnetic, is working, my work is done.
If you find that your machine is still not starting the cycle after ...
...slam the lid anymore
3. Since my Lock switch (2nd switch), which is engaged with a magnetic, is working, my work is done.
If you find that your machine is still not starting the cycle, you will ...
Question about 24032\24036 Top Load Washer
...slam the lid so that the washer will start. slam the lid hard and when you push the button it starts. It is a faulty switch about to go bad that interupts the signal for safety. Repair Clinic.com ...
Question about 24032\24036 Top Load Washer
...slam the lid anymore
3. Since my Lock switch (2nd switch), which is engaged with a magnetic, is working, my work is done.
If you find that your machine is still not starting the cycle after ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions
