Maytag Skybox won't dispense anything. Whenever I hit a button to dispense any soda, the light for the specific button flashes, then all four buttons flash until I open the machine and close it again.
Question about SkyBox MBV1976A Beverage Dispenser
Maytag Skybox Beverage Dispenser/Refrigerator The refrigeration unit on my Skybox quit working. It still dispenses and lights work just fine...but it doesn't get cold. I'm told by Maytag that they don
lights flashing All the lights on my machine keep flashing. I can't get them to stop. Whether the machine is full or empty, they won't go out. The flashing lights usually indicate a jam or the flapper
Maytag SkyBox I am having the same problem, it is not cooling. My Skybox will start up but it stops after 10 seconds. Can you please send me a Serivice Manual for the Maytag Skybox. Thank you..... ...
...Dispensing Problem I bought a used Skybox three weeks ago. Everything was great. Cold drinks and no jams. Tonight it stopped dispensing. Unit is running and cans are still cold. I press any of the ...
Question about SkyBox MBV1976A Beverage Dispenser
...SKYBOX 'MAYTAG' BE PERMENENTLY INSTALLED OUTSIDE I have a Maytag skybox drink dispenser, I live in Quebec Canada, can this dispenser be installed outside permenantly ? Thanks The Maytag SkyBox is not ...
Question about SkyBox MBV1976A Beverage Dispenser
skybox all lights flash when you press a drink selection and nothing happens the solution for my flashing lights/no beverage problem was so simple to solve. There is a small sensor right next to the ...
Question about SkyBox MBV1976A Beverage Dispenser
Maytag Skybox - Dispense Problem/Lights Flashing Were you able to fix the problem you posted with the dispensing of drinks? I've got the same issue and tried cleaning the small silver sensor on the ...
Maytag skybox relay replacement Not Cooling I purchased the relay that was posted. There are two parts with it and a long wire. I opened the box on the left hand side of the back and don't see any ...
lights blink when drink button pushed. Hello first check the flap sensor where the magnet in the flap is even.You will have to take the door off and apart the sensor is right behind the flapper door ...
Usually answered in minutes!
2,522 Questions
276 Questions
209 Questions
172 Questions
114 Questions