Questions & Answers for: sky box problems recording

...sky box & dvd recorder , anyone know why !!! how can i fix it !!! many thanks. The sound delay would not be caused by hooking amp up but must be a software problem in sky box. Try to get an off air ...

...sky box and I can get it to play dvds on the tv but only through the same scart socket. I wish to know how to set it up so I can record off my sky decoder and still watch dvds (obviously not at the ...

...Sky box I have connected my Sony DVD recorder to a Sony TV and Sky box. However, when I try to do the Easy Setup, it appears to set the channels on the DVD recorder using Smartlink. Once the setup is ...

...sky box has analog outputs that can connect to the recorder's inputs. Everything but DVI and HDMI is analogue. Also if you want the recorder to control your recorder you need an IR blaster of some ...

...box separate to the tv to record with tv off.the vcr will recieve only on the av channel av1 when connected to tv.a sky box or cable can be connected to av2 on sharp using a second scart lead and ...

...Sky box and VHS recorder. The (new) house has a standard co-ax socket as well as a communal aerial Sky outlet. Problem is there is no instruction manual and I don't understand why I am only getting ...

sky+ box. I have followed every instruction in the book but for some reason am just unable to do so. The recorder just doesnt copy and also if I play a dvd on it there is no sound. PLease help. Thanks

sky + box keeps going into standby mode (turning its self off) and programs dont record or cant be cleared off the planner Reset your Sky Box. That fixes 98% of all problems, disconnect from power ...

...Sky box I get no response on the VCR. The Users Manual did not come with the VCR, and the users manual I downloaded for the NV-FJ620 series bears no resemblence to the connections and only similar to ...

Sky Plus box is not allowing you to record one channel while watching another and is displaying a "no signal" error, there could be a few potential causes for this issue: Insufficient signal strength: