Question about 2002 Stratus
...You can try a damaged nut socket my Blue Point would go all the way on but may cut off the ends. Then you would go down to the next size. An air hammer if applied to the side will loosen the
...the front axle nut is on a 2001 dodge dakota 4x4 . i have been having alot of noise in the front end and i think that it might be the bearings There only two size for your truck 32mm or 36mm
2001 Dodge Stratus? first jack up side you will be working on and place jjackstand under the frame, next remove the wheel,to make it easier remove the caliper and tie away, dont remove the brake hose!
What size is the socket for the 2002 Dodge Stratus Axle nut? 32mm
...size socket do i need to remove the axle nut to replace the hub assembly the axle nut size is 36 mm. What size socket do I need for my differential axle pinion nut on my 2010 Dodge ram 1500 ...
Question about 2001 Alero
what size sockets do i need to change the wheel hub on my 2001 dodge ram 1500 4x4 for the axle nut its a 42mm. or you can use a standard size 1 1/8 in
Question about 2001 Alero
...size socket do i need to fit axle nut on a 2007 dodge caliber? I told you already 22mm. It was a guess, but it was right!! ...
Question about 2001 Stratus
2001 Dodge stratus 2.7 removal of thermostat what size bolts hold the thermostat in vehicle are they Three bolts that hold the thermostat in what size bolts Are they Here's an article that may be ...
Question about 2006 Stratus
...size socket do I need to remove the front axle nut from it? Question edited for clarity. Question moved to model category. Changing wheel bearing? what size is the drive axle nut on drive side 6cyl ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions