Questions & Answers for: Delphi sirius signal problems

...signal from the sattelite to fix the radio. Withing less than 30 minutes they had fixed it, and it works fine now. XM and Sirius radios have merged and that is what caused the problem. This was mine ...

...of markets out there. The best way to fix the problem is to use a direct FM module. This way your Sirius will override the FM channel whether it is used or not. Here is a link for one: ...

...help me out here what is going on The Tuner is bad. It's a very very very common problem among Sirius and XM users. It's a cold solder joint at the antenna input of the receiver. If it's out of ...

My sirius mirge display backlight is out radio works fine but display is out http://satelliteradiofix.com/mirge.html

...antenna and still get the same problem. The problem is a bad tuner. Very common problem in XM and Sirius tuners. New models do not have this issue, they are built by DEI and very reliable. You can ...

wont power on use your warrenty and replace...this is common in using or buying sirius products...

...signal even after a refresh by xmradio. I had left it on for 24 hrs with the receiver turned off Your antenna pin solder joint on your dock connector is bad. I've seen this problem a lot (I buy ...

...this problem. I have a ROADY XT MODEL SA10276. Thank you very much! Terry Just a few weeks ago Sirius XM changed there channels. That might have been one problem. But it shouldn't be loading all ...

...Is there an adaptor that will enable me to still use the Delphi sa10000? Should be able to hear Sirius channels through your FM radio. Cassette is better, but you can just set up your FM radio to ...

...Sirius sends the program signal. 4) It is possible the antenna cable to your unit is loose at the connections and/or damaged. A weaker signal may get your stations, but may prevent the additional ...