Questions & Answers for: sink spigot blocked

...agreed O3 is not a LG error code. OE is more likely and if so it could be the main pcb faulty, a blocked drain pump or a blocked spigot under the sink where the drain hose connects onto. take

...- just a rubber flap that can stick. remove drain hose at exit of pump and check. also, if drain is plumbed into a spigot on the sink trap, remove drain hose at sink end and check spigot is not ...

...spigot on the sink trap, check that ther spigot and drain hose are not blocked - this is very common also see if you can get to the drain pump and check there is nothing jamming the impellor. also if ...

WHAT IS F11 ERROR MIELE DISHASHER G 1232 SC hi this is a drain fault. you will probably find the drain spigot under the sink is blocked where the drain hose connects.

...left in the dishwasher after the cycle is complete Look under the sink to where the drain hose goes to. Take the hose off the spigot and make sure the hole is clear and not blocked with grease. ...

...of running a cycle.Hve pulled dishwasher out and there is no water leaking but we have to drain machine manually you have a blockage try the drain spigot under the sink or the pump may be

...check the drain spigot under the sink it may be partially blocked. After that check the sump of the didhwasher for blockages. After that the pump must be checked. you may need help for that good ...

...a screw driver down the spigot coming off your sink pipework to dislodge any gunk or seeds that may be stuck in there, also ensure the filters in the bottom of both draws are clean , hope this ...

...sink via a spigot). Take off the spigot from the u bend and then disconnect  the spigot from the grey corrugated drain hose, check both parts are clear.Best of luck what is the model number as ...

sink spigot located ? I have a fault #20 showing on the dial That will be the drain hose connection to the sink drain pipe probably under the sink. Google sink spigot in images and you can see what it