...spool pin was broke off my Singer 3116 machine - can I get a replacement part for it? If not, any ideas on what to use to replace it? Should never had been place where the handle lifts up.. Ask you ...
spool cap/holder Does the thread run through the cap/holder? Or does it just hold the spool of thread in place? This is using the horizontal thread and a top loan bobbin. my CG550 is running very slow
Question about 5050 Mechanical Sewing Machine
...spool of thread called on a Singer 5050? Do you have a manual? I checked the online manual available on the Singer site for your model and the part you mention is called a Horizontal spool pin and ...
Question about 1120 Mechanical Sewing Machine
singer sewing machine model 1120 - I need a vertical thread spool holder. Where can I get one and where do I put it on the machine? some thread spools are wound in a way that they need a vertical ...
...singer sew mate thread holder I need the thread spool holder that on the top of the sewing machine. Search the internet for: Make + Model + the word "Parts" If unsuccessful, a spool pin can be made ...
...singer 4411. Thank you To thread the upper thread, make sure that the needle bar is fully up, using the hand wheel. Put the thread spool on the spool pin and secure it with the spool holder. Use the ...
...singer sewing machine thread spool holder Hi the spool holder on this machine is just a plastic rod with a slight taper and it just pushes into the hole. If the old piece is broken off in the hole, ...
Question about 1120 Mechanical Sewing Machine
.... The basic straight spool pin is at https://www.sewingpartsonline.com/spool-pin-juki-simplicity-singer-64083.aspx . I hope this helps. Cindy ...
spool thread to release the bobbin to put it in the bobbin case. Hold the hand wheel and turn the inner knob away from yourself. Singer has most of their manuals available here: https://www.singer.com
Question about 1120 Mechanical Sewing Machine
/www.manualslib.com > ... > Instruction book Singer CG-500 Manual Online: Threading the machine. Threading the machine 1. Place pin. Use the 2 correct spool pin holder to hold spool firmly in place. 2
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions