Questions & Answers for: singer sewing machine plastic cover

sewing thru plastic cover both sides with tissue paper, the firm kind,, then sew, remove paper, smaller stiches makes this easier depends on how thick of plastic but you will need to use 'sharp' ...

...singer futura ce 100 I am trying to sew a straingt sticth. Machine beeps and stops. When I had this experience I cleaned the thread path under the plastic cover. There was a piece of thread caught ...

...machine up. Part of the hole where the foot cord plugs in came apart. Singer Model 7422 . Can you tell us how to get the plastic cover off? they snap together and apart, you'll think you are going to ...

...Singer and complain because it is a very important piece. Their number is 1-800-4singer. Make sure that you register your machine with them, also on their site www.singerco.com Good luck and happy ...

Singer. It should have come with a small black plastic shied that will slide over the Feed Dogs and clip into the two holes in the face plate to cover them completely. If you've lost that dark plastic

...singer sewing machine brilliiance 6180' need to fix the bobbin winder as it has come undone so need to remove the plastic cover from the machine Yes, you would, but there's a much better and easier ...

...machine. remove the top and bottom cover cover open the front cover brush out all lint check bobbin for thread lock and lint. lube all moving metal parts with "non petroleum " light oil. Do not lube ...

plastic cover removal on singer 7422 Computerized machines have plastic clips that hold the cover in place. There is a reason as the manufacturer does not want users to open the units and damage the ...

...remove the cover for Singer 7462 The covers on computerized sewing machines are not intended to be removed except by technicians. Usually, they are held on by plastic clips that can easily be

...singer sewing machine 117 featherweight 11? For the most part, computerized machines are made so the covers are difficult to remove as the company does not want internal components to be damaged. ...