Questions & Answers for: signs bad transmission speed sensor


...transmission shifted into over drive when I left a stop sign at a corner then the motor quit running all at the same time. Motor cranks over and has good fuel pressure but wont fire. Code said po141 ...


Question about 2001 Town & Country

1 Answer

transmission jerks really bad going into 2nd gear, all of the other gears change really smoothly, but its just second gear. It mainly does it when i drive off slow, and it jerks really bad when i make


...signs of the vehicle speed sensor going bad. This sensor is located on the output shaft of the transmission. You should be able to unplug the electrical connector and then screw the assembly out of ...

...bad speed sensor (not the one for the speedo). Speed sensor is located on the transmission and several years ago was a $20.00 part. I'm not sure if this your problem or not, just thought I'd share ...

signs/lights, etc. I have noticed that the speedometer is not working properly.....i.e. when I'm moving at 30 mph the speedo is reading 10 mph ? But no engine lights are present.... I would think that

...signs of a bad speed sensor If you mean the speed sensor for the transmission the check engine light will come on and you won't have a working speedometer. If you mean the wheel speed sensor the ABS ...

Question about 2001 Aztek

1 Answer

bad. did not change. stopped at stop sign and car wont move. diagnostic machine code said torque convertor locked.. could this just be the speed sensor. never had any transmission slipping or anything

...transmission hold light is flashing and my speed ometer quite working at the same time the light started flashing is that a sign that the speed sensor has went bad Sure is. Replace it and things ...

...its the output speed sensor. but then again dodge has had issues with wires breaking or being melted if to close to the exhaust. look for visible signs of bad wires.

Question about 2005 PT Cruiser

3 Answers

...transmission oil is brownish and smelling burnt = bad sign fit a used gearbox would be cheaper than a rebuild The P0780 codes is detected when no rotation change occurs between input (turbine ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

john h

Level 3 Expert

23438 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides