Questions & Answers for: Harley Davidson FLHX Street Glide signal system

...signal 1 TIME.The 1st digit is stored and the dash will flash.Enter 2nd digit (b), and repeat sequence until done.After the 5th digit is entered, the KEY icon stops blinking, and the system is ...

...signal 1 TIME.The 1st digit is stored and the dash will flash.Enter 2nd digit (b), and repeat sequence until done.After the 5th digit is entered, the KEY icon stops blinking, and the system is ...

my turn signals both of them flash when i try to start the bike it wont start then 2 min later it starts 2008 flhx streetglide sounds like the security system.

system? Id check the fob battery or replace it w/ new one. 2 use the code you input useing the turn signals to start the bike.. 3 do the wow test & check for codes.. in allarm module..good luck.

...number, press Right signal 1 time to accept 8. Press LEFT signal however many times for fifth number, press Right signal 1 time to accept System should now be disarmed and ready to start Good ...

...again!!! The beeping is a signal that the fridge has not got down to, or holding temperature... You may have a thermostat or gas system fault. Check and see that the fridge has actually got

...signal 1 TIME.The 1st digit is stored and the dash will flash.Enter 2nd digit (b), and repeat sequence until done.After the 5th digit is entered, the KEY icon stops blinking, and the system is ...

...signal 1 TIME.The 1st digit is stored and the dash will flash.Enter 2nd digit (b), and repeat sequence until done.After the 5th digit is entered, the KEY icon stops blinking, and the system is ...

...system. DO NOT sit on seat, lift bike off kick stand, or anything else that will activate the security mode!Turn IGN to IGNITION.Quickly (within 2 seconds) hold BOTH turn signal switches until ...

...the left and the right turn signal switches. After the turn signals flash once, the system enters the transport mode. With the fob removed, the motorcycle can be moved without setting off the