sat signal magnavox tv had tv repaired, when I reconnected sat cable, can't get a signal...all other tv's in house are getting one. make sure you have it in proper a/v or cable mode
magnavox 15" lcd says it has attention no signal Had the same problem. The solution: My remote has a button labeled "TV/VIDEO". I must have accidentally pushed this button so when I turned the TV on ...
...Magnavox LCD TV and it worked fine with Charter cable. I had the cable dissconnected for two months then turned back on, now i just get the menu and cable setup screen on my tv but no picture so i no ...
signal out of the Magnavox. I can't get it to switch over to the video signal from the VCR. I have had the Magnavox plugged into the A/V tuner with both the single-line DVD/VCR Out cable as well as an
Question about Magnavox 51MP392H Rear Projection Television
...Magnavox projection screen tv. The tv will not turn on. When I had it on the tv would shut it self off. The TV is approx. 20 yrs old and it's a 50". Any help out there. Will you have got a lot of ...
...magnavox sdtv. I get autoscan but no channels are found. I do not have an antennae. Do I need one? Help! If ur tv a LCD tv it is a digital tv.U do not require a Digital converter box to get the new ...
Question about Magnavox 51MP392H Rear Projection Television
...magnavox tv will not pick up cable even though it allows the search of channels i still get static what is your cable provider? they are the ones to contact with this issue. you are paying for cable ...
magnavox tv turns off by itself Disconnnected my DirecTV today and went to plan old antenna TV, but the TV turns itself off randomly. hello, i don't where you live but there are no analogue ...
Question about Magnavox 27MS343S 27" TV
...magnavox tv. Model# 19400-00a.The tv turns on, but their are wriggly lines so you can't see the picture. If try to turn the tv off, the picture comes on, but no sound and the closed c I have an older ...
Magnavox 15MF605T/17 only getting black and white What is your TV source? If you are using the component input, check if you have two of the video signal wires mixed up between the source and the TV. ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions