Questions & Answers for: signal cable sat dish

signal, I pull all zeroes. Any help would be appreciated. it is multi sat multi sat compatable!My opinion is buy a powerd multi switch you can getem at radio shack or from a sat dealer that will clear

Ad

Question about DISH Network(r) 311 Satellite System

1 Answer

think" again. also check to be sure the cable fitting "stinger" is straight. no signal could also mean the tv or vcr is off channel or is not connected or inputted properly with the original tv remote

Ad

Question about DISH Network(r) 311 Satellite System

1 Answer

...signal from sat 119. How is this possible? Previously I only had one cable going from the 119 connection on my dish, directly into my receiver with no connections... ONE cable the whole way. Now, I ...

Question about DISH Network(r) 311 Satellite System

1 Answer

...signal into one and then one cable from that would go from the box to your receiver. if you are wanting you can also just hook up the 91 its the most used but you probably will be missing a few ...

Question about KVH TV/SAT Switch SATELLITE RECEIVER

1 Answer

...cable each) My problem now is trrying to supply a signal to a 3rd reg TV Can this be done with a splitter of some kind? standard spitter can be used for regular TVs. If the signal degrades, it can be ...

Question about DISH Network(r) 311 Satellite System

1 Answer

...signal reaches only 1 cable outlet I have a dual-satellite Dish Net system. When it was installed, they connected one dish to each of the 2 former cable lines into the house. But now only 1 of 2 ...

signal.. Also you could try is turn off the sat box then back on and see if that fixes that problem if it does could be something wrong with the sat box.. also test a dvd player to see how that reacts

...cable plugged in there is hand tight, and follow it back making sure any other connections you see are tight. If the signal doesn't return, unplug the receiver for 10 seconds and plug it back ...

Radio Shack for around $40. If you have cable TV or Sat (Dish or Direct TV) you need one of their boxes to convert the signal back to analogue. The Walmart type boxes WILL NOT WORK for cable or Sat TV

...SIGNALCABLE OR SAT BOX NEEDS RESET -Remove or unplug the power cable from the Cable TV or SAT set top box. -Keep it unplugged for 2 to 3 minutes. -Plug the power cable back into your Cable or SAT ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Are you a Televison & Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...